Manhattan coffee table

Wooden frame with polyurethan rubber padding. Seat cushions in differentiated-density polyurethan foam and acrylic fibres.

Back cushions in Fillpiuma. Fully removable covers.

Base in wood: wenghe, cherrywood or metal. It is possible to match a coffee table with wooden top and base in the same finishing or with metal base.

design: Giuseppe Bavuso

Manhattan coffee table 4.00/5 (80.00%) 2 votes


Arnold Sofa

Sofa frame is made of solid, multilayer wood and particle board. Springing system of seats is made of elastic belts. The padding is in C.F.C.-free non-deformable polyurethane foam and 100% polyester fibre.

Feather cushions with inside support in polyurethane foam. Feet in polypropylene.

design: Acam_Lab

Rate this product



Table with top supported by a large diameter column with small metal capital. The top, attached to the base with a ring screw connection, can be in transparent or sandblasted glass of 15 mm thickness, or in transparent grey or sandblasted grey glass of 12 mm, or in marble, white Calacatta Carrara or Marquina black, thickness 20 mm.

The structure is treated manually with the ancient encausto technique (Venetian stucco) or with a special gold or silver leaf finish. Base is also also available in varnished metallic paint micaceous or titanium colour or covered by polished reflecting inox steel.

design: Lella – Massimo Vignelli, 1988

Rate this product


Cuno Sofa

Designer Cuno Frommherz has in the past proven his skills in perfectly combining simplicity with comfort. In this programme he makes optimum use of the power of Leolux to work tailor-made.

This modular programmes many options make almost any setup possible. The series consists of sofas, a loveseat, a (rotating) armchair, two footstools and various add-on elements. And entirely to your own taste: three types of feet, various seat heights, high or low arms, round and rectangular corner elements and various comfort and upholstery options.

In addition, every element has four seat depths, so it matters not whether youre tall or not so tall.

Cuno is authentic Swiss design with straight lines and maximum comfort, like youre used to from Leolux.

2008. Design: Cuno Frommherz

Technical details:
The Cuno modular programme offers a large number of options and variants:

  • 2 arm variants (high and low)
  • 2 comfort options (cushions standard or firm)
  • 2 upholstery versions: Points embroidered cushions or without embroidery (Straight)
  • 3 different feet: Trineo, Cubic, Palo (walnut or oak)
  • 2 feet heights (standard / +3 cm, except for the rotating armchair)
  • 4 seat depths: the seats can be adjusted by hand (3 x 2.5 cm)

Apart from the fixed and add-on elements, the programme offers a headrest (in two sizes), an arm cushion, a slumber cushion and an adjustable cushion (with the high arm only).

Covering options: Combinations of colours and materials possible.

Feet lacquer options: Trineo/Cubic in stainless steel, optionally in all Leolux lacquers (except Brush), Palo in oak (all oak stain colours) or walnut (standard M2100).

Rate this product


Wing Lounge Armchair

Wing is a lounge chair for indoor and outdoor use. Chair have seat and back made of moulded polyurethane foam covered in leather or made of woven cord in either natural, white or black.

Laser-cut steel frame with choise of finishes:

  • chrome
  • black nickel
  • painted white, black or aluminium.

Design: Giuseppe Bavuso


  • H: 70 cm (27,6)
  • seat H: 33 cm (13) 27 cm (10,6)
  • L/W: 70 cm (27,6)
  • P/D: 74 cm (29,1)
  • seat D: 54 cm (21,3)
Rate this product


Chair F 590- F 591

Charming variation on the F 510 – F 511 was restored to its place of honour in 2011. The buttons and upholstery lend the fauteuil a friendly, nostalgic appearance.

In terms of comfort, there is little to choose between the F 591 (with low back) and the F 590 (with high back) – its simply a question of what you prefer. Both of them are equally snug, inviting and comfortable.

Rate this product


Pinq Lounge Armchair

Pinq Lounge is amazingly comfortable yet extremely decorative. A unique piece of furniture that provides a room with atmosphere and identity. A fauteuil that surrounds you, embraces you, and still looks open and inviting and comfortable.

Thats what Rene Holten had in mind when he designed the Pinq Lounge. Egg-shaped, soft and rounded, Pinq Lounge delights with its smooth, flowing lines.

Its characteristic notches in the sides lend the fauteuil a light, inviting appearance – almost like wings that enclose and protect you as soon as you relax into its soft, deep seat.

Pinq Lounge Armchair 4.00/5 (80.00%) 1 vote


Paco Armchair

Everyone can get their own colour. Paco creates unity in diversity. This is Gerard Vollenbrocks first model for Artifort. Simple and elegant. Pacos straight lines unfold to create a comfortable seat that is active without being excessive.

Paco is an ideal chair for living room tables or for meeting rooms. Its slim tubular frame and slightly projecting armrests lend it an open, elegant appearance.

While a contrasting colour on the back of the armrest adds a distinctive accent.

Rate this product